The tape and reel machine can be divided into two categories: semi-automatic and fully automatic, which is the bulk component products, through the inspection, commutation, testing and other stations, into the carrier belt. With the continuous upgrading and refinement of electronic products and a high degree of integration, electronic components have also been transformed from the past plug-in type to SMD type to save the installation space of the circuit board and expand the functions of the product. It is a large revolution in the electronics industry.
Working Principle
The working principle of braiding machine: braiding tape packaging machine and gas connected, if it is a hot package, let the knife rise to the right temperature, adjust the carrier tape and air pressure. Use manual or automatic loading equipment to put SMD components into the carrier belt, the motor rotation to cover the belt Forming carrier belt pulled to the encapsulation position, this position cover belt on the top, carrier belt on the bottom, after heating up the two blades pressed on the cover belt and carrier belt, so that the cover belt to seal the SMD components above the carrier belt mouth, so as to achieve the purpose of SMD components encapsulation. Then the receiving tray rolls up the encapsulated carrier tape.
The taping machine can provide unified orientation, test product polarity, appearance check, laser marking and other functions according to the customer’s production needs.
Some taping machines are not heat encapsulated, they are cold sealed. By cold sealing, it is possible to make the cover tape and carrier tape stick together without heating, and the cover tape used at this time should be sticky. Before encapsulation, the carrier tape generally has to go through two SENSOR, one is for counting and the other is for material control. The material control is to detect whether there is any leakage of components inside the carrier tape. If a leak is detected, then the motor of the taping machine will stop immediately and the cutter head will be born to the above position. Counting SENSOR is generally used with optical fiber, but also with and requires a fast response speed, so as not to miss the count. Counting SENSOR can count the side holes of the carrier, but also can count the molding groove. The number of side holes has to be converted back to the correct number of SMDs.
Performance
The taping machine has a fast taping speed. With the test function, equipped with the corresponding tester, the taping machine can quickly test the capacity value and resistance value of the chip, and sort out the good and bad products; the taping machine adopts PLC as the core control; the display is uniquely designed, with LCD display to place orders and simulate the status of each control point, which can easily set and modify various parameter values, monitor various working states and its taping speed. The machine is stable and reliable.
Features
● Wide range of applicable products and easy to change specifications.
● Stable and reliable cam and divider transmission system.
● The fault detection design is perfect, and the alarm is clear at a glance.
● Variable speed converter can automatically increase or decrease the speed according to the material supply condition.
● PLC electric control system, accurate and stable, low failure rate.
● Adjustable belt height, flexible and convenient.
● Vertical and horizontal take-up options.
● Precise empty material detection and parts counting.
● Complete options to provide a complete solution.
For more detail please contact us at info@tapereelmachine.com
